Open the RadBeacon app (either iOS, Android, or Mac). Step 3: Find the hardware inside the RadBeacon app The UUID listed will be the one we'll use to program the hardware. The following screen will be present, where you'll need to give your new Beacon a name and click Create Beacon. If you do not yet have a Beacon, you'll click the Add Beacon button to create one. Then, copy the UUID, which is what we'll use to program. If you already have a Beacon that you wish to use to program your hardware, click the name of the Beacon on this screen to view the details. Here is a list of all the Beacons that Simple In/Out knows about for your organization. Click Settings in the upper-right, followed by Beacons on the left. Head to and log in with your email/password. If you already have the UUID you want program into your Beacon, you can skip this step. All RadBeacon USB hardware have a 30 minute lockout that prevents tampering and will make them unavailable until powered off and back on. This is to avoid reprogramming the wrong Beacon. Unplug any Beacons that may be in range of your device used to reprogram. Places to download: Windows, Mac, iOS, Android. To reprogram a hardware Beacon you will need the free RadBeacon app from Radius Networks. You will also need to be an administrator of Simple In/Out in order to view your Beacons and unique identifiers (UUID), which are required for programming. If you need to purchase Beacon hardware, check out our Beacon Hardware Purchasing Guide. While these steps are specific for this vendor, there are likely similar steps for other hardware Beacon vendors. This article will assist you with programming a RadBeacon USB for Simple In/Out.
0 Comments
Leave a Reply. |